S50LEA

Napisal/-a **s56jlp** » 19 Maj 2001, 13:34

kako se v linux debian-slink vkljuci IP maskerado? hocem se telnetati direktno na rcul in ne preko leje...

moj pr_pi0a:

ifconfig pi0a inet 44.150.1.81 hw ax25 S56JLP-6 netmask 255.255.0.0 broadcast 44.150.1.255 mtu 1500 arp up

echo -n 35 > /proc/sys/net/ax25/pi0a/t1_timeout
echo -n 2 > /proc/sys/net/ax25/pi0a/t2_timeout
echo -n 18000 > /proc/sys/net/ax25/pi0a/idle_timeout
echo -n 30 > /proc/sys/net/ax25/pi0a/maximum_retry_count
echo -n 1 > /proc/sys/net/ax25/pi0a/backoff_type

piconfig pi0a speed 0 clockmode 1 txdelay 2 persist 240 slot 3 squelch 2 dma 3

/sbin/route add 44.150.1.1 mss 1460 window 20440 irtt 500 dev pi0a
# /sbin/route add -net 44.150.1.1 netmask 255.255.255.0 mss 1460 window 20440 irtt 500 dev pi0a
/sbin/route add default pi0a
#
/sbin/route add 44.150.1.81 lo
/sbin/route add 44.150.1.81 mss 1500 window 2048 dev pi0a
# /sbin/route add 44.150.8.1 mss 1460 window 20440 irtt 500 dev pi0a

/usr/sbin/axparms -route add pi0a S50LEA S55YLJ -ipmode V
/usr/sbin/arp -H ax25 -i pi0a -s 44.150.1.1 S50LEA
# /usr/sbin/axparms -route add pi0a S50YFE S55YLJ-2 S55YIG-8
# /usr/sbin/arp -H ax25 -i pi0a -s 44.150.8.1 S50YFE

mislim, da so potrebne se neke DNS fore, ker mi telnet sedaj javi host name lookup failure, ce dam telnet open rcul.uni...

Leon

Napisal/-a **s51bw** » 19 Maj 2001, 19:13

Za uporabo IP maskerade ti kot "odjemalcu" ni treba nastaviti drugega kot default router na 44.150.1.1
(route add default gw 44.150.1.1).

DNS si seveda postimaj. V datoteko /etc/resolv.conf vpisi

nameserver 44.150.1.1

73

Andrej

Napisal/-a **s56jlp** » 19 Maj 2001, 20:24

se vedno ne dela....

mogoce bo ta izpis kaj pomagal

/etc/host.conf:
order hosts,bind
multi on

/etc/hosts:
127.0.0.1 ATR localhost

/etc/resolv.conf:
# An example /etc/resolv.conf might look something like:
#
# domain ampr.org
# search ampr.org
name server 44.150.1.1

/etc/rc.boot/pr_pi0a:
ifconfig pi0a inet 44.150.1.81 hw ax25 S56JLP-6 netmask 255.255.255.0 broadcast 44.150.1.255 mtu 1500 arp up

piconfig pi0a speed 0 clockmode 1 txdelay 2 persist 240 slot 3 squelch 2 dma 3

# #/sbin/route add 44.150.1.1 mss 1460 window 20440 irtt 500 dev pi0a
/sbin/route add -net 44.150.1.0 netmask 255.255.255.0 pi0a
/sbin/route add default gw 44.150.1.1 pi0a
#
/sbin/route add 44.150.1.81 lo
/sbin/route add 44.150.1.81 mss 1460 window 20440 dev pi0a

/usr/sbin/axparms -route add pi0a S50LEA S55YLJ -ipmode V
/usr/sbin/arp -H ax25 -i pi0a -s 44.150.1.1 S50LEA

ukaz route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
44.150.1.81 0.0.0.0 255.255.255.255 UH 0 0 0 pi0a
44.150.1.81 0.0.0.0 255.255.255.255 UH 0 0 0 lo
44.150.1.0 0.0.0.0 255.255.255.0 U 0 0 1 pi0a
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 1 lo
0.0.0.0 44.150.1.1 0.0.0.0 UG 0 0 0 pi0a

ukaz route -v:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
44.150.1.81 * 255.255.255.255 UH 0 0 0 pi0a
44.150.1.81 * 255.255.255.255 UH 0 0 0 lo
44.150.1.0 * 255.255.255.0 U 0 0 1 pi0a
localnet * 255.0.0.0 U 0 0 1 lo
default 44.150.1.1 0.0.0.0 UG 0 0 0 pi0a

poskusil sem ze veliko drugih nastavitev (iz net in ax25 howto-ja), ampak brez uspeha.

tnx za pomoc,

Leon

Napisal/-a **s51bw** » 19 Maj 2001, 20:34

Pravilen zapis v /etc/resolv.conf je

nameserver 44.150.1.1

in ne

name server 44.150.1.1
===========

Torej, pisano skupaj je prav.

73

Andrej

Napisal/-a **s56jlp** » 19 Maj 2001, 20:45

prepisal sem direktno iz enega od howtojev..

bom poskusil
Leon

Napisal/-a **s56jlp** » 19 Maj 2001, 20:55

zivjo Andrej,

ja sedaj dela. ponavadi gre vse narobe, ce se ne drzis howtojev, tokrat je bilo drugace..hi

mimogrede, ali je treba resetirati pc, ce spreminjas te skripte v /etc, da se ponovno nalozijo?

tnx za pomoc!
Leon

Napisal/-a **s51bw** » 19 Maj 2001, 22:25

Linuxa ni treba restartati, razen ce ne menjas jedra operacijskega sistema...

73

Andrej

S50LEA

IP maskerada

Kdo je na strani