Napisal/-a S51BR » 28 Jul 2006, 13:52
Ups, sem že našel. Za Linksysov router sem nastavil po tehle navodilih.
Using a Web browser, bring up your router's configuration page. By default, the URL is 192.168.1.1, the user name is blank, and the password is "admin".
Be sure you are using the latest version of the firmware for this device. The version of your current firmware is displayed on the Setup page. Check the Linksys Web site for details.
Click the Advanced tab.
Click the Forwarding tab.
If you see a column labeled "Customized Applications" on the left, enter "EchoLink" on the first line. (Not all versions of the Linksys firmware have this column.)
In the first pair of Service Port Range (or Ext.Port) boxes along the top, enter 5198 and 5199.
On the same line, under Protocol, choose UDP (or check the UDP box).
On the same line, enter the local IP address of the computer running EchoLink. (If you are not sure what the address is, run "winipcfg" or "ipconfig" from a command prompt).
If there is an Enable check box on the same line, check it.
Click Apply to save changes.
*****************
73, Rudi, S51BR
ex. S56SRB in S57SRB,
TX/RX: Yaesu FT 857D, Icom T7E