TM-D710E, nov Kenwoodov proizvod, zamenjava za TM-D700,
bom imel, kot kaže med prvimi na zalogi. Oktobra bo zaloga normalna, prve pa dobim že v septembru.
Poln opis z cenami bo na www.elnaprave.com
takoj po dopustu.
Ker je novica sveža, besedila nisem prevedel.
31st July 2007
We are pleased to send you preliminary information on our new VHF/UHF Dual Band Mobile Transceiver, the TM-D710E.
TM-D710E VHF/UHF Dual Band FM Mobile Transceiver
1. MAIN FEATURES
It has a built-in 1200/9600 bps TNC. With a portable computer, this allows you to enjoy Packet operation easily and it also enables you to enjoy the APRS®, and EchoLink® operation modes.
Full Dot LCD & Smart menu
The radio has a large full dot multi-functional LCD display (235x65 dots). It enables you to see the display easily, and you can operate the radio via its smart menu system which you can operate instinctively.
Over 60 APRS® menus
Various new APRS features are available. The predessor model, the TM-D700E, had 26 menus but the new TM-D710E has over 60 menus for greater APRS enjoyment.
High RF Power Output (50W)
The TM-D710E provides an impressive 50 watts of RF power on both VHF & UHF bands, with a choice of High/Mid/Low settings.
Dual Receive on Same Band (VxV, UxU, VxU)
In addition to simultaneous receive on both VHF and UHF bands, the TM-D710E can receive two frequencies on the same band (V x V or U x U).
Green & Amber Colour Display
To maximize visibility, the backlight colour of the large LCD display can be switched between green and amber.
For extra versatility, the TM-D710E has a programmable memory function that can store five entire operating profiles, ready for instant recall at the push of a button. Each profile includes such settings as display mode, frequency range and memory mode.
1,000 Memory Channels
There are 1,000 split memory channels for storing essential data, such as transmit and receive frequencies, frequency step and tone frequency. Each channel can be identified with a 6-digit alphanumeric memory name. The memory data can be edited and stored on a PC, using the optional PG-5G interface cable and MCP-2A memory control software.
As well as VFO scan, programmable scan, MHz scan, memory scan and call scan, the TM-D710E offers memory bank scan. The 1,000 channels can be grouped into 10 banks for selective scanning. Scan resume (time-operated, carrier-operated and seek), memory channel lockout, tone scan, CTCSS scan and DCS scan functions are built-in.
The TM-D710E is equipped with analogue CTCSS (42 subtone frequencies) and digital DCS (104 codes).
Up to 10 EchoLink® memory stations can be stored using call signs (max. 8 alphanumeric characters). You can easily access an Echolink node terminal without having to use a call sign.
ECHOLINK® NODE TERMINAL Operation
When the TM-D710E is connected to a PC (with the necessary software installed) usinig the optional PG-5H, it can operate as a node terminal for Echolink® access.
＊ APRS is a registered trademark Bob Bruninga, WB4APR
＊ Echolink® is a registerted trade mark of Synergenics LLC
＊ Echolink® official WEB site: http://www.echolink.org
Special Call Alert
Visible Message Notifications
Wide Band Reception : 118-524MHz & 800-1300MHz as standard
Separate VOL/SQL for A and B Bands
GPS connector for NMEA 0183 format
8-Pin Mini-DIN connector for PC connection
Programmable Function Keys
Band Mask (Mask unused band)
S-meter Squelch & Hysteresis Timer
Audio Mute & Hang-up Timer
Automatic Power Off (up to 3-hours)
Selectable Frequency Step
Repeater Offset (selectable)
Automatic Repeater Offset (On/Off, VHF only)
DTMF Memory (10 channels, 16 digits)
Power-on Password Protection
Beep On/Off, Volume Control
Microphone program Function
Channel Display Mode
LCD Brightness Control, Automatic Dimmer
Switch to External Speaker
Reset (VFO, PART, PM, FULL)
Cross Band Repeater Function (Dealer Modification)
DTMF Remote Control (available in Cross Band Repeater mode)
2. OPTIONAL ACCESSORIES
MC-59 16-Key Hand Microphone
MC-60A Desktop Microphone
MJ-88 Microphone Plug Adapter
PG-2N DC power Cable
PG-3B DC Line Noise Filter
PG-5A Data Cable
PG-5F Extension Cable Kit (4m)
PG-5G Programmable Interface Cable
PG-5H PC Interface Cable Kit
SP-50B External Speaker
2. SUPPLIED ACCESSORIES
16-Key Hand Microphone (MC-59)
Mobile Angle, Panel Bracket (for Mobile Use), Panel Stand (for Fixed Base Station use)
Screw set & Fuses
Panel Separate Cable(8Pin Modular <->8Pin Modular 4m length)
GPS Cable(Φ2.5mm Stereo Plug 2m length)
Instruction Manual (Basic Operation)
In-Depth Operation Manual (CD-ROM)
Frequency Range Band A & B
Band B TX : 144-146 MHz, 430-440 MHz
RX : 118-524MHz
RX : 136-524MHz, 800-1300MHz
Mode F1D, F2D, F3E
Operating Temperature Range -20℃ to +60℃
Frequency Stability Within ±5ppm (-10°~ +50°C)
Antenna Impedance 50 ohm
Power Requirement DC13.8V ±15%
Current Drain Hi : 50W Less than 13.0A (VHF)
Less than 13.0A (UHF)
(transmit) Mid : 10W Less than 5.5A (VHF)
Less than 6.5A (UHF)
Low : 5W Less than 4.0A (VHF)
Less than 5.0A (UHF)
Dimensions (W x D x H)
Projections not included Panel : 155 x 38 x 70 mm
Body : 140 x 142 x 43 mm
Weight (net) Control Panel
TX/ RX Unit 0.3 kg
RF Output Power Hi 50W
Mid Approx. 10W
Low Approx. 5W
Modulation Reactance modulation
Maximum Frequency Deviation Within ±5kHz
Spurious Radiation Less than -60dB
Modulation Distortion (300Hz ~ 3kHz) Less than 3%
Microphone Impedance 600 ohm
Circuitry Double Super Heterodyne
1st IF (A Band/B Band)
2nd IF (A Band/B Band)
45.05MHz / 49.95MHz
455kHz / 450kHz
Sensitivity (VHF / UHF) Less than 0.16μV
Squelch Sensitivity Less than 0.1μV
Selectivity -6 dB
-50 dB More than 11kHz
Less than 30kHz
Kenwood follows a policy of continuous advancement in development.
For this reasons, specifications may be changed without notice.